Events

Below is a list of recent and forthcoming events at Lucideon, as well as conferences/events that we will be attending.

2017 Event
30 November 2017 Networking Event: Advancing Formulations - Oral, Skin & Hair Care
We are hosting our fourth annual industry networking event which will bring industry and academia in the personal care, wound care and pharmaceutical sectors together to explore collaborative opportunities, and learn about the latest developments and case studies in the formulation arena. To find out more about this event and/or to sign up to attend please click here
12-16 November 2017 International Conference on Sintering 2017
Dr Andre Prette will be in attendance and will be presenting on 'Innovative Control Systems for Flash-Sintering' during the Novel Sintering Processes IV session, which will be taking place between 8:30am and 11:50am on 16 November. To find out more about this event please click here
7 November 2017 Symposium: Novel Silicate and Phosphate Materials for Bone and Tooth Restoration
The BIODENSOL consortium would like to invite you to attend an academic and industry symposium to highlight the special role of novel silicate and phosphate materials in hard tissue replacement/regeneration. To find out more about this event and/or to sign up to attend please click here
2 November 2017 Webinar: Novel Materials Development to Address Dental Sector Needs
In this webinar we will explore the important drivers facing the dental industry and discuss the potential roles that novel materials could play as ‘enablers’. To find out more about this webinar and/or to sign up to attend please click here
19 October 2017 Webinar: Cleaning Issues with Additive Manufactured Devices
While this general topic has been covered in various webinars in the past, we will be trying here to isolate several key aspects of the problem. The unique porous coated surfaces of new additively manufactured (AM) medical implants have proven to be quite complex and are creating challenges with respect to effective cleaning. To find out more about this webinar and/or to sign up to attend please click here
8-12 October 2017 Materials Science & Technology 2017
MS&T brings together scientists, engineers, students, suppliers and more to discuss current research and technical applications, and to shape the future of materials science and technology. Dr Julius Bonini was in attendance. To find out more about this event please click here
28 September 2017 Webinar: Common Post-Processing Treatments for Additive Manufactured Components
This webinar covered all of the common post-processing treatments applied to additively manufactured (AM) metal components. Topics related to the removal from build plates and stress relieving of as-fabricated parts to more complex processes such as machining, cleaning and surface finishing were addressed. To see the webinar recording please click here
20 September 2017 Materials Protecting Society Launch Event
Gemma Budd gave a presentation on the subject of 'How Materials are Critical to Protecting our Population'. To find out more about this event please click here
14 September 2017 Webinar: Validation of Additive Manufactured Components through Specialized Testing
In this webinar, we explore a number of analysis techniques that can be used to provide insightful competitive advantage through design and performance evaluation. To see the webinar recording please click here
13-15 September 2017 Eighth Summer School 2017 - Imperial College London
Dr Andre Prette attended and spoke at the eighth CASC Summer School on Ceramics. To find out more about this event please click here
12 September 2017 Sustainable Manufacturing of Advanced Ceramics Workshop - Sheffield University
Co-organized by Sheffield University and hosted by Prof. Ian Reaney, this event gathered the ceramic community within the UK and focuses on ceramic topics including synthesis, processing, additive manufacturing and a wide variety of sintering techniques for Advanced Ceramics. Lucideon's Dr Andre Prette was in attendance. To find out more about this event please click here
7 September 2017 Webinar: The Effect of Powder Milling on Ceramic Performance
In this webinar, Dr Adam Healey, materials scientist, describes several different milling techniques, the advantages and disadvantages associated with them and discusses a number of case studies where altering of the milling process has been instrumental. To see the webinar recording please click here
4 - 8 September 2017 28th Annual Conference of the European Society for Biomaterials (ESB) - Athens, Greece
Dr Xiang Zhang of Lucideon spoke at ESB 2017, an event dedicated to the biomaterials science community. To find out more about this event please click here
3 - 8 September 2017 19th International Sol-Gel Conference - Liege, Belgium
Dr Gilda Gasparini and Dr Mark Cresswell both presented papers at this event which draws together sol-gel researchers from around the world. To find out more about this event please click here
27 - 28 July 2017 ICCFM 2017 : 19th International Conference on Ceramic and Functional Materials - Istanbul, Turkey
Kambiz Kalantari attended this event as Lucideon's Operations Manager of Materials. To find out more about this event please click here
18 July 2017 Webinar: Optimization of the Drying Process – a way to Maximize Process Efficiency and Product Quality
In this webinar, Dr Gilda Gasparini, Chemical Engineer, and Dr Ying Zhu, Materials Scientist, looked into a number of advanced drying techniques, their pros and cons and also discuss how these drying techniques help improving real-life manufacturing processes. To see the webinar recording please click here
22 June 2017                 Webinar: DoE (Design of Experiments) and Statistical Interpretation of Test Data
Presented by Dr Gilda Gasparini, Chemical Engineer, and Dr Phil Jackson, Technical Manager, both of Lucideon’s Healthcare division, the webinar focuses on the benefits that design of experiments affords in terms of product optimization, time and cost savings, and yield improvement. To see the webinar recording please click here
15 June 2017 Heritage Building Seminar - The Victoria Quarter Conservation Project, Leeds Beckett University
This ‘case study’ seminar examined the processes involved in restoring a Listed or Historic building. Dr Geoff Edgell, Director and Principal Construction Consultant, discussed the role materials testing and analysis plays in regenerating failing buildings.
13 - 15 June 2017 Additive Manufacturing with Powder Metallurgy (AMPM) conference at Powdermet 2017 - Las Vegas, Nevada, USA
Metallurgical and additive manufacturing expert Julius Bonini presented at AMPM 2017. His technical session was titled 'Effect of Hot Isostatic Pressing on Fatigue Properties and Particle Shedding of Additively Manufactured Ti-6Al-4V-ELI' with dates and times TBC. To find out more please visit the website
8 June 2017 Webinar: Understanding Polymer Structure and Processing to Minimize Failures
Hosted by Dr Richard Padbury, polymer technology consultant at Lucideon, the webinar looked at the beneficial properties of polymers in a range of applications and how these can be best utilized.  To see the webinar recording please click here
8 June 2017 The Society of Glass Technology Conference – Furnace Solutions 12 - Dealing with Practical Glassmaking Issues
Held at Lucideon’s Stoke-on-Trent headquarters, Furnace Solutions 12 dealt entirely with ‘practical’ glassmaking issues. The conference is targeted at glassmakers, furnace equipment and specialist materials suppliers. To find out more, click here
7 June 2017 The Society of Glass Technology Training Day – Furnace Life - Lucideon HQ, Stoke-on-Trent, UK
Held at Lucideon's Stoke-on-Trent headquarters, the training day provided an introduction to glass furnace properties and performance; critical elements which are central to the glassmaking process. Further information can be found here
4 - 7 June 2017 13th Canadian Masonry Symposium - Halifax, Nova Scotia, Canada
Dr Geoff Edgell, Director and Principal Construction Consultant at Lucideon and Cliff Fudge, Technical Director at H+H Celcon presented ‘The use of Digital Image Correlation in Masonry Research’ at this symposium. To find out more click here
22 - 23 May 2017 Pain Therapeutics - London, UK
Lucideon Healthcare representatives were in attendance at this pharmaceutical event. Lucideon develops novel, innovative technologies for the healthcare industry with potential benefits in pain relief pharmaceuticals, including opioids. For more information please visit the website
21 - 24 May 2017 6th China-Europe Symposium on Biomaterials in Regenerative Medicine - Porto, Portugal
Dr Xiang Zhang spoke at this event which sought to bring together collaborators from Europe and China to bring forward significant advances to the field of Biomaterials with specific focus on Regenerative Medicine applications. For more information please visit the website
18 May 2017 Webinar: Chemical Imaging of Industrial and Healthcare Materials by ToFSIMS
Hosted by Dr Chris Pickles, consultant to Lucideon, the webinar looked at the application of surface science techniques in industry to provide understanding of the distribution of ingredients in materials, with a specific focus on healthcare applications.  To see the webinar recording please click here
8 - 11 May 2017 ASTM Committee Meetings - Medical Devices - Toronto, Canada
Lucideon's Julius Bonini attended this meeting. For more information please visit the website
27 April 2017 Webinar: The Art of Solving Coatings Challenges through Microchemical Analysis
Hosted by Gary Kagel, this webinar explored various microchemical techniques, their uses and limitations, and how to most effectively solve key coatings challenges. To see the webinar recording please click here
25 - 27 April 2017 International Biotechnology Congress-2017 - Xi'an, China
Lucideon's Dr Xiang Zhang was a featured speaker at the first ever BIT International Biotechnology Congress. IBC-2017 aims to provide a platform for researchers and decision makers in biotechnology to present their latest findings and learn about all the important developments in biotechnology. For more information click here
25 - 26 April 2017 Materials 2017 - ILEC Centre, London, UK
Robert Kennett attended this event to discuss with people their latest materials developments and applications for industry. For more information click here
25 - 26 April 2017 Making Pharmaceuticals - Ricoh Arena, Coventry, UK
Sharad Vora attended to stay abreast of the latest developments from industry. He will be available to meet throughout the 2 day event. For more information click here
11 - 12 April 2017 ASM International Spray Society - Charleston Convention Center, South Carolina, USA
This event focussed on the methods of characterization for thermal spray materials. Lucideon's Gary Kagel presented at the event discussing "Advantages of Electron Microprobe Analysis in the Characterization of Thermal Spray Coatings". For more information click here
5 April 2017 Ceramic Innovation Network Conference - Digital Technologies in Ceramic Manufacturing - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
This event brought together academics and industrialists from all sub-sectors of the ceramic industry seeking to improve their knowledge of the potential applications of digital technologies within ceramic manufacturing / production processes. To find out more, please click here
4 - 6 April 2017 In Cosmetics Global - London, UK
'The leading event for personal care ingredients'. Lucideon was in attendance across this three day exhibition event. To find out more click here
27 - 29 March 2017 8th DDF Summit Drug Delivery & Formulation - Berlin, Germany
Join Aia Malik presented 'iCRT - Advanced Drug Delivery Platform - Tackling your formulation and delivery challenges' on the 29th March. To find out more click here
20 - 21 March 2017 ADA Annual Meeting - San Francisco, USA
Gemma Budd, healthcare business manager, attended this event.
19 - 22 March 2017 TAGA 2017 - Technical Association of the Graphic Arts - Houston, Texas, USA
Lee Bullock presented on 'Standardization for the Graphics Industry using Ceramic Color Standards'. To find out more click here
16 March 2017 Webinar: Alternative Uses for Bricks in Structural Work: Moving Beyond Thin Brick
Hosted by Dr Geoff Edgell, Director and Principal Construction Consultant at Lucideon, the webinar looked at alternative uses for bricks in structural work. To see the webinar recording please click here
14 - 18 March 2017 AAOS 2017 - San Diego, California, US
Lucideon was at booth 1861 with experts on hand to discuss orthopedic product and wear testing. To find out more click here
14 - 16 March 2017 America Makes TRX - University of Texas El Paso, El Paso, TX, US
Brent Holloway, director of sales and marketing, attended the America Makes TRX @ UTEP. The event drew together AM professionals to discuss R&D, project developments and results with project kickoffs, technical updates, and closeout briefings. To find out more click here
7 - 8 March 2017 Coatings & Advanced Innovations for Industrial Gas Turbines Symposium - Greenville, SC, USA
Dan Cunningham attended this one and a half day symposium on the latest technology in Advanced Thermal Spray Coatings, Advanced Materials and Additive Manufacturing in the industrial gas turbine industry. To find out more click here
28 February - 1 March 2017 CED Life Science Conference - Raleigh Convention Center, NC, USA
Dr. Richard Padbury attended this event, one of the nation's leading life science conferences. To find out more click here
26 February - 2 March 2017 TMS 2017 146th Annual Meeting and Exhibition - San Diego, California, US
Metallurgical expert Julius Bonini was in attendance at this event which brought together representatives of the global minerals, metals, and materials community. To find out more click here
26 January 2017 Industry Networking Lunch - Medical Materials & Design - The Trinity Centre, Cambridge Science Park
Our third free to attend networking event focussed on opportunities and challenges in the medical materials and design space. Over lunch, there were a number of informal presentations and an opportunity to network with industry and academia.
2016 Event
8 December 2016 Webinar: Ensuring Quality and Standardization in Powder Metal Input for Additive Manufacturing
Hosted by Joan Morra, Metallurgical Engineer, and Dr Phil Jackson, Technical Manager, Healthcare, the webinar covers the importance of powder quality and optimization for successful Additive Manufacturing processes. To see the webinar recording click here
6-8 December 2016 Additive Manufacturing Americas - Pasadena Convention Centre, California, USA
This event aims to cover the entire ecosystem of advanced design and manufacturing technologies to stimulate innovation and enhance the efficiency and profitability of OEMs. To find out more click here
1 December 2016 The Centre for Defence Enterprise (CDE) Science & Technology Providers Networking Event - Grand Connaught Rooms, London, UK
Lucideon experts are attending this event. To find out more click here
23-24 November 2016 Scotland Build 2016 - Centre (SECC), Glasgow, UK
Lucideon's experts will be attending to keep up to date with the latest trends and developments of the construction sector. To find out more click here
16 November 2016         SCS Formulate UK - Ricoh Arena, Coventry, UK
SCS focuses on raw materials, ingredients and formulation services for personal care and cosmetic products. Dr Chris Pickles will be presenting his abstract 'The Use of Surface Analysis Techniques in Hair Product Development'. To find out more about the event please visit the website
2-3 November 2016 Advanced Engineering 2016 - NEC, Birmingham, UK
Lucideon's experts will be attending to keep up to date with the latest engineering trends and developments. To find out more click here
27-28 October 2016 Partnerships in Drug Delivery 2016 - Boston, USA
Lucideon's Business Manager for Healthcare is speaking at this event about Lucideon's novel drug delivery platform, iCRT, with abuse deterrent properties. To find out more click here
26-27 October 2016 London Build 2016 (trade) - Olympia, London, UK
Lucideon's experts will be attending to keep up to date with the latest trends and developments of the construction sector. To find out more click here
23-27 October 2016 Materials Science & Technology 2016 - Salt Palace Convention Centre, Salt Lake City, Utah, USA
Lucideon metallurgical expert, Julius Bonini, is speaking at this technical meeting and exhibition event on 'Microstructural and Surface Defects Found in Additive Manufactured Titanium Components'. To find out more and for attendance information please visit the website
20 October 2016 Webinar: Perspectives on Extractables – Pharmaceutical Products and Medical Devices
Medical devices and pharmaceutical products can present a risk to patients by way of exposure to substances present in manufacturing or packaging materials. This webinar discusses how to understand and evaluate those risks by following the procedures set out in ISO 10993. To see the webinar recording please click here
18-20 October 2016 UK Construction Week 2016 (trade) - NEC, Birmingham, UK
This event is focused around designers, builders and innovators of the built environment. On 18 October, Dr Geoff Edgell will present ‘Creating Comfortable Conditions in Buildings’. To find out more click here
13 October 2016 Webinar: Failure Analysis - What Engineers Need to Know
This webinar describes the general processes applied to a typical failure analysis of a metal component. To see the webinar recording please click here
12-13 October 2016 Offsite Construction Show 2016 - Excel, London, UK
Lucideon's construction experts will be in attendance of this event which delivers knowledge transfer, networking and innovation showcases for the construction sector. To find out more please visit the website
3-5 October 2016 62nd Clemson Brick Forum - Anderson, SC, US
At this forum, Dr Geoff Edgell, Principal Consultant for Construction, will discuss alternative uses for bricks in structural work and potential opportunities if earlier pioneering investigations were to be developed. Find out more about the forum here
28-29 September 2016  3D Medical Applications - Baltimore, USA
Held in Baltimore, Maryland, this event will bring together thought leaders, experts, engineers, doctors, researchers, and regulators in the field of 3D technology. To find out more click here
26-30 September 2016  Tecnargilla 2016 - Rimini Fiera Expo Centre, Italy
Tecnargilla is a unique opportunity to meet ceramic market leaders. It is held in Italy, home of some of the world´s best ceramic and technological offerings. To find out more click here
26-28 September 2016  Additive Manufacturing for Medical, Bioprinting - Boston, MA, USA
Metallurgical expert Julius Bonini will attend this event which aims to understand the latest printing techniques, groundbreaking research and innovative materials for an improved additive manufacturing implementation and processes. To find out more click here
22 September 2016  Webinar: Your Metal Component Has Failed in Fatigue: What do you do next?
This webinar, hosted by Julius Bonini, Principal Consultant, Metallurgy, at Lucideon, provides a blueprint for the typical procedures which should be applied when a component fails in fatigue. To see the webinar recording please click here
20 September 2016 Additive Manufacturing UK - Stakeholders Event - BEIS, London, UK
We were in attendance at this event where UK stakeholders discussed strategy for the industrialisation of AM processes.
13 September 2016 Institute of Refractories Engineers - Lucideon HQ, Stoke-on-Trent, UK
Our Ceramics Project Leader, Nigel Leak, gave a talk at the next IRE meeting, held at our HQ in Stoke-on-Trent, on the development of firing technology in the tableware industry. To find out more about the IRE please visit the website here
4-7 September 2016 The Light Show at Autumn Fair - NEC, Birmingham, UK
This event brought together designers and manufacturersof lighting to showcase their latest technologies. To find out more please visit the website
2 September 2016 The Science of Hair Care - A Good Hair Day - Burlington House, Piccadilly, Mayfair, London, UK
This event was a one day symposium addressing the science of hair from conditioning and styling to physical properties and characterisation. Dr Chris Pickles, Consultant to Lucideon, presented 'Using Surface Analysis Techniques to Develop Hair Products'. To find out more please visit the website
20 July 2016 HyMedPoly Workshop “Biomaterials and cells interaction – new concepts of drug-free antibacterial therapies”
This is the second HyMedPoly Open Science workshop and the full day event included presentations from leading academic, clinical and industrial researchers including Lucideon's own Ian Campbell. To find out more please visit the event website
23 June 2016 Webinar: Additive Manufacturing for the Healthcare Sector - Challenges and Issues
This webinar highlights and discusses several issues associated with additive manufacturing (AM) technology that the medical implant and device community are currently facing. To see the webinar recording please click here
21 June 2016 Connect to your customers by roadmapping your technology - Lucideon, Stoke-on-Trent, UK
Technology roadmapping is an excellent, well-established and recognised tool for large and small businesses to communicate to current and potential customers the direction they are heading with their business improvement ideas. Find out more here
16 June 2016 Science Networking Reception in Cambridge - The Trinity Centre, Cambridge, UK
Lucideon hosted this free-to-attend wine and canapés reception; a great opportunity to network with scientific companies and academia on the Cambridge Science Park and beyond.
16 June 2016 Digital Construction Forum 2016 - Lucideon HQ, Stoke-on-Trent, UK
We hosted a free construction forum on Thursday 16 June 2016, ‘Digital Construction’.
15-16 June 2016 OMTEC 2016 - Chicago, USA
We were in attendance at this event keeping up to date with the latest industry happenings and meeting with industry professionals. To find out more please visit the event website
13-15 June 2016 Industrial Minerals International Congress and Exhibition 2016 - Marriot Prague, Prague, Czech Republic
Dr. Andre Prette spoke at this event. The congress covered a wide range of topics on minerals within industry, with business leaders from many backgrounds delivering key talks. To find out more please visit the event website
9 June 2016 Webinar: Cleaning Validation of Reusable Medical Devices
Reusable medical devices (such as surgical tools, etc.) need to be cleaned and/or sterilized before each use. To ensure this is the case, manufacturers are required to validate their cleaning/sterilization instructions accordingly. This webinar discusses a range of factors to consider when developing such protocols. To see the webinar recording please click here.
9 June 2016 The Society of Glass Technology Conference
The Society of Glass Technology held their Furnace Solutions 11 conference at Lucideon's Stoke-on-Trent headquarters. Find out more here
8 June 2016 The Society of Glass Technology Training Day
The Society of Glass Technology will be holding their training day, 'Environmental & Energy' at Lucideon's Stoke-on-Trent headquarters. Find out more here
8-9 June 2016 7th International Conference on Applied Hair Science - Redbank, New Jersey, USA
Bringing together the people creating hair products today with innovators sharing insights of the technologies and methods of tomorrow. Dr Chris Pickles is presenting 'The Use of Surface Analysis Techniques in Hair Product Development'. To find out more click here
7-8 June 2016 Vision London - London, UK
Vision London is a platform for the latest innovations in architecture, design and the built environment to be showcased and discussed. As leading experts in the construction industry and innovation Lucideon will be in attendance. To find out more click here
7 June 2016 Webinar: Update on USP Tests for Elemental Impurities - Are you ready?
This webinar discusses the new USP <232> Heavy Metals limit test, which will be fully in place by 1 January 2018, and the effects it will have for businesses. To see the webinar recording please click here
5-7 June 2016 AMPM 2016 - Boston, USA
Lucideon presented at the Additive Manufacturing with Powder Metallurgy 2016 event, joining fellow industry experts from across the globe for this three day event which highlighted the latest technological advances and research in the industry. To find out more please visit the website
26 May 2016 Wear and Medical Device Testing Seminar - STC, Shanghai, China
Lucideon helped to organize and deliver this seminar led by Hong Kong based STC. Their experts covered topics including; regulatory requirements for FDA approvals, standards for implant testing, including ISO 10993, test mechanics for hip and knee, differences between AMTI and ProSim simulators, and more.
24 May 2016 Wear and Medical Device Testing Seminar - STC, Dongguan, China
Lucideon helped to organize and deliver this seminar led by Hong Kong based STC. Their experts covered topics including; regulatory requirements for FDA approvals, standards for implant testing, including ISO 10993, test mechanics for hip and knee, differences between AMTI and ProSim simulators, and more.
24 May 2016 Research Triangle Park Open House Reception - Research Triangle Park, North Carolina, USA
Our open house reception, which took place between 11am and 2pm on 24 May 2016 was a great opportunity to see our new RTP offices and discover more about our healthcare technology developments.
23-25 May 2016 7th Annual Global Drug Delivery & Formulation Summit & Expo - Berlin, Germany
Aia Malik attended this event. The DDF event covered small molecule and biologics formulations and introduced the teams behind some of the most exciting projects and studies in progress right now. For more information please visit the website
19 May 2016 Science for Industry session at the World Biomaterials Congress - Montreal, Canada
The Science for Industry session brought together industrial and academic leaders to discuss the development and applications of biomaterials for Healthcare. To find out more please click here
28 April 2016 Webinar: Wear and Mechanical Testing of Hips and Knees - What the Standards Don’t Tell You
This webinar discusses: common standards - what they cover and what they don’t and areas that require unique test methods including: coatings of devices; ageing of devices; adverse wear testing; dynamic testing of acetabular components and adapting simulators to emulate joints without available standards. To see the webinar recording click here
27-28 April 2016 North England Build 2016 - Manchester, UK
Lucideon attended this event which offered insight into the latest developments of the construction sector. To find out more and/or to register to attend please visit the website
21 April 2016 Webinar: Additive Manufacturing of Metallic Components - The Metallurgical Perspective
This webinar covers an introduction to Metal Additive Manufacturing, various methods and equipment, E Beam vs. Laser Melting methods, powder bed vs deposition methods & available metal systems. To see the recording of the webinar please click here
18-19 April 2016 SMi 13th annual Controlled Release event - London, UK
This event sought to engage attendees in lively discussions with industry leaders to discover the latest innovations. As a leading materials technology company with a dedicated controlled-release technology Lucideon delegates were in attendance to meet and talk with other attendees about the latest advances and applications. To find out more click here
14-15 April 2016 6th Annual International SMR and Advanced Reactor Summit - Atlanta, GA, USA
Brent Holloway attended and spoke at this event which brought together some of the biggest names in the nuclear industry. To find out more click here
13 April 2016 Ceramic Innovation Network Conference - Energy Efficiency in Ceramic Processing - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
This event brought together academics and industrialists from all areas of the ceramics industry who are looking to reduce energy consumption and costs for ceramic manufacturing processes. To find out more, please click here
12-14 April 2016 Infrarail 2016 - Excel, London, UK
Infrarail 2016 drew together professionals and businesses from the UK's growing rail industry for this networking event. Lucideon was in attendance as a provider of professional testing and development for many of the products and materials used within the rail industry. To find out more click here
12-14 April 2016 Cite 2016 - Excel, London, UK
Following on from the success of the first event in 2014 CITE 2016 allowed businesses within the UK's construction, transport, utilities and communications sectors to showcase their latest offerings and developments. As a leading innovative partner of many within the sector, Lucideon attended to see the latest developments.
11-15 April 2016 MACH 2016 - NEC, Birmingham, UK
Our experts were in attendance to see the latest advances in the manufacturing industry. Please visit the website for more information.
8 April 2016 ISO 14001:2015 and ISO 9001:2015 Revisions Workshop - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
To help our clients understand the new revisions made in September 2015 and help prepare them for the path to certification, Lucideon CICS held a free half-day workshop. The workshop focused on four key topics (context of the organization, leadership, planning and improvement) associated with the revised standards. Click here for more information.
6 April 2016 The Engineering Testing Show - Derby Roundhouse, Derby, UK
This event drew together professionals from across the engineering sector who have an interest in engineering testing. As a leading provider of testing and analysis in the UK Lucideon was in attendence. To find out more please click here
4-7 April 2016 10th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology - SECC, Glasgow, UK
The 10th world meeting focused on some of the hot topics from the pharmaceutical industry with lectures provided from leaders in the sector. Lucideon delegates were in attendance to help stay abreast of the latest requirements for pharmaceutical clients. For more information click here
10 March 2016 Accelerating British Innovation Through Cross-Industry Collaboration - The Williams Conference Centre, Grove, Wantage, UK
Lucideon experts presented and exhibited at this event.
6-11 March 2016 Electric Field Assisted Sintering and Related Phenomena Far From Equilibrium - Hotel dos Templários, Tomar, Portugal
Lucideon's Andrea Sansone gave a talk on Thursday 10th at this Flash Sintering focused event which drew together all of the major exponents in the field. For more information on the event please visit the website
8-10 March 2016 Ecobuild 2016 - Excel, London, UK
We attended the Ecobuild 2016 event which provided a platform for industry professionals and innovators to network and showcase their latest developments. For more information please click here
2-3 March 2016 AAOS 2016 Annual Meeting - Orlando, Florida
Sean Borkowski, Lucideon Healthcare USA, attended this event.
Please click here to find out more about the event.
25 February 2016 EU ETS: Understanding the Carbon Market, Evaluating Future Compliance Costs and Managing Trading Requirements - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
This event was designed to help attendees keep up to date with the latest policy developments, analyze previous year’s actions, plan a compliance strategy for the remainder of the Europoean Union Emission Trading Scheme Phase III, and think about what may lie ahead in Phase IV.
23-24 February 2016 Buildoffsite Direction Group Meeting & Dinner - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
This members' event was the first Direction Group meeting of 2016. Attendees received a full tour of the Lucideon facilities following the meeting. For more information please click here
18 February 2016 Webinar: The Use of Imaging for Product Claims
This webinar, hosted by Dr Chris Pickles, focusses on how chemical mapping and topographical profiling can be used to support product claims. To see a recording of the webinar, please click here
17-18 February 2016 The UK Concrete Show - NEC, Birmingham
We were in attendance at this event which was dedicated to bringing together the biggest names and latest news from the concrete industry. For more information please click here
9 February 2016 Whitewares Ceramics Training - Lucideon HQ, Stoke-on-Trent, UK, ST4 7LQ
As an internationally recognized expert in ceramics, our whitewares courses are aimed at tableware, tile and sanitaryware manufacturers, as well as retailers and suppliers. These modules will give an insight into ceramics technology, the unique characteristics and applications for each type of ceramic product, identifying various types of ceramic materials, processes and products and help identify the most suitable ceramic product for a specific application. Click here for more information, including a definitive list of all modules in this series and dates, and/or to register.
29 January 2016 2016 - What’s Trending in Sustainability? - Jurys Inn London Watford, Clarendon Road, Watford, WD17 1JA
The workshop explored how to capitalize on utilizing the experience of others to help focus, drive and develop business in order to gain a collaborative edge. The day included presentations from industry guest speakers focusing on environmental, social and economic aspects of sustainability to meet both national and international obligations.
28 January 2016 Webinar: Validation and Quality Assurance of Medical Device Cleaning Processes - 3pm (UK time)
This webinar discusses: current regulatory guidance, residues and sources of contamination, and residue limits, how to identify contaminants and their source via surface analysis, gravimetric analysis and residue analysis. You can view the webinar recording here
21 January 2016 Webinar: ISO 14001:2015 and ISO 9001:2015 Revisions - 3pm (UK time)
This free webinar by Lucideon CICS discusses these recent changes and what effect this could/will have on your business, ensuring you experience a smooth transition from your current 14001 and/or 9001 certification.
20-22 January 2016 Drug Delivery Partnerships - Business Development Event - Palm Beach Gardens, FL
This event drew together professionals from across the pharmaceutical and drug delivery industries to discuss the latest technologies and forces affecting the pharmaceutical industry today. To find out more please click here