Links to recordings of some of the webinars we have presented in recent years are available below.
The growing use of hydrogen in the energy industry sets in motion a myriad of metallurgical issues and problems. The metallurgical community has long been dealing with problems associated with hydrogen interaction with metals; from containment in its liquid state at cryogenic temperatures to its burning as a fuel at high temperatures and everything in between. This is part one of a two-part webinar series that addresses some of the more complex metallurgical issues related to hydrogen.
Want to know more about the MaterialsMatrix, the free community for everyone interested in materials? Watch this webinar to find out more about how you can network, learn and collaborate in this new online community.
While this general topic has been covered in various webinars in the past, here we isolate several key aspects of the problem. The unique porous coated surfaces of new additively manufactured (AM) medical implants have proven to be quite complex and are creating challenges with respect to effective cleaning.
This webinar, presented by Julius Bonini, Principal Consultant, Metallurgy, covers all of the common post-processing treatments applied to additively manufactured (AM) metal components. Topics related to the removal from build plates and stress relieving of as-fabricated parts to more complex processes such as machining, cleaning and surface finishing, are covered.
In this webinar, Julius Bonini, Principal Consultant, Metallurgy, explores a number of analysis techniques that can be used to provide insightful competitive advantage through design and performance evaluation.
This webinar, presented by Sara Randall, Senior Materials Engineer, describes the general processes applied to a typical failure analysis of a metal component.
This webinar, presented by Julius Bonini, Principal Consultant, Metallurgy, provides a blueprint for the typical procedures which should be applied when a component fails in fatigue.
Hosted by Joan Morra, Metallurgical Engineer, and Dr Phil Jackson, Technical Manager, Healthcare, this webinar covers the importance of powder quality and optimization for successful Additive Manufacturing processes.
This webinar covers metal additive manufacturing, various methods & equipment, E Beam vs. laser melting methods, powder bed vs deposition methods & available metal systems