Links to recordings of some of the webinars we have presented in recent years are available below.
Want to know more about the MaterialsMatrix, the free community for everyone interested in materials? Watch this webinar to find out more about how you can network, learn and collaborate in this new online community.
In this webinar, ceramic processing expert Andy Perry walks through the procedure of pressure casting for ceramic products. He provides an overview of why pressure casting is favored by many manufacturers, and gives special attention to the disadvantages of the technique.
A wide range of techniques are employed to form ceramic components, with each technique having specific advantages and disadvantages. In this webinar, Richard White and Mike Salt discuss these techniques, and how and why they are chosen, with regards to advanced ceramics.
In this webinar, Andrew Perry, Group Ceramic Processes Leader at Lucideon, discusses the key aspects of air entrapment in casting slips and, using case studies, discusses the methods used to eliminate contamination at source, thereby minimising pinhole faults.
While this general topic has been covered in various webinars in the past, here we isolate several key aspects of the problem. The unique porous coated surfaces of new additively manufactured (AM) medical implants have proven to be quite complex and are creating challenges with respect to effective cleaning.
This webinar, presented by Julius Bonini, Principal Consultant, Metallurgy, covers all of the common post-processing treatments applied to additively manufactured (AM) metal components. Topics related to the removal from build plates and stress relieving of as-fabricated parts to more complex processes such as machining, cleaning and surface finishing, are covered.
In this webinar, Julius Bonini, Principal Consultant, Metallurgy, explores a number of analysis techniques that can be used to provide insightful competitive advantage through design and performance evaluation.
In this webinar, Dr Adam Healey, materials scientist, describes several different milling techniques, the advantages and disadvantages associated with them and discusses a number of case studies where altering of the milling process has been instrumental.
In this webinar, Dr Gilda Gasparini, Chemical Engineer, and Dr Ying Zhu, Materials Scientist, look into a number of advanced drying techniques, their pros and cons and also discuss how these drying techniques help improving real-life manufacturing processes.
In this webinar, hosted by Gary Kagel, we explore various microchemical techniques, their uses and limitations, and how to most effectively solve key coatings challenges.
Hosted by Joan Morra, Metallurgical Engineer, and Dr Phil Jackson, Technical Manager, Healthcare, this webinar covers the importance of powder quality and optimization for successful Additive Manufacturing processes.