Links to recordings of some of the webinars we have presented in recent years are available below.
In this webinar, our Microprobe Analyst, Gary Kagel, demonstrates how materials and process questions are rapidly answered through expert microchemical analysis. Electron probe microchemical analysis (EPMA) is highlighted as a valuable tool to support the development, optimization and troubleshooting of advanced aerospace coatings.
In this webinar Julius Bonini, principal consultant, metallurgy at Lucideon, discusses the finer details of metal powders used in additive manufacturing. He covers topics including: the three most common methods of metal additive manufacturing, how metal powders are made, how you can test and evaluate your powders and products, and the challenges that the industry still faces in exploiting the full potential of metal additive manufacturing.
While this general topic has been covered in various webinars in the past, here we isolate several key aspects of the problem. The unique porous coated surfaces of new additively manufactured (AM) medical implants have proven to be quite complex and are creating challenges with respect to effective cleaning.
This webinar, presented by Julius Bonini, Principal Consultant, Metallurgy, covers all of the common post-processing treatments applied to additively manufactured (AM) metal components. Topics related to the removal from build plates and stress relieving of as-fabricated parts to more complex processes such as machining, cleaning and surface finishing, are covered.
In this webinar, Julius Bonini, Principal Consultant, Metallurgy, explores a number of analysis techniques that can be used to provide insightful competitive advantage through design and performance evaluation.
During this webinar, Gary Kagel, explores various microchemical techniques, their uses and limitations, and how to most effectively solve key coatings challenges.
This webinar, presented by Sara Randall, Senior Materials Engineer, describes the general processes applied to a typical failure analysis of a metal component.
This webinar, presented by Julius Bonini, Principal Consultant, Metallurgy, provides a blueprint for the typical procedures which should be applied when a component fails in fatigue.
Hosted by Joan Morra, Metallurgical Engineer, and Dr Phil Jackson, Technical Manager, Healthcare, this webinar covers the importance of powder quality and optimization for successful Additive Manufacturing processes.
This webinar covers metal additive manufacturing, various methods & equipment, E Beam vs. laser melting methods, powder bed vs deposition methods & available metal systems